Heeethin Heights

Welcome to Heeethi’n Heights — where comfort meets a little bit of chaos 😎🔥

Whether you’re laying low, living loud, or just embracing your inner “Heeethi’n,” this apparel line is built for everyday wear with a bold attitude.

✔ Premium navy garments with athletic gold print
✔ Super soft, permium fabric 
✔ Relaxed, comfortable fit for everyday wear
✔ Designed for those who don’t take life too seriously

‼️⚠️ IF YOU WOULD LIKE TO PICK UP AT GREENE COUNTY FISH & GAME SPRING RENDEZVOUS CAMP – BE SURE TO SELECT “LOCAL PICKUP” INSTEAD OF PAID SHIPPING

Port & Co^™ Core Blend Tee, Port & Co^™ Long Sleeve Core Blend Tee

A reliable choice for comfort, softness and durability.

• 5.5-ounce, 50/50 cotton/poly
• 1×1 rib knit collar
• Shoulder to shoulder back neck tape
• Tear-away label

Port & Co^™ Core Fleece Crewneck Sweatshirt, Port & Co^™ Core Fleece Pullover Hooded Sweatshirt, Port & Co^™ Core Fleece Full-Zip Hooded Sweatshirt

Cozy sweats in our core weight.

• 7.8-ounce, 50/50 cotton/poly fleece
• Air jet yarn for softness
• Tear-away label

Port & Co^™ Oversized Core Fleece Sweatshirt Blanket

• 7.8-ounce, 50/50 cotton/poly fleece
• Mitered V corners
• Fully hemmed
• Dimensions: 65″ x 85″
• Tear-away label

Port & Co^™ Core Fleece Sweatshirt Cinch Pack

We took our PC78H Core Fleece Sweatshirts and PC54 Core Cotton Tees and created a laid-back cinch pack, complete with a front pouch pocket.

• 7.8-ounce, 50/50 cotton/poly fleece
• Drawcord closure
• Dimensions: 17.75″h x 14.5″w; Approx. 1,037 cubic inches
• Tear-away label

Note: Bags not intended for use by children 12 and under.

3M Print Graphic Decal in 12″ or 3″ Square

3M IJ-180Cv3-10 is a 2mil premium wrap adhesive vinyl for long-term vehicle and signage graphics. It offers excellent conformability, strong adhesion, and 3M Comply™ air release channels for smooth, bubble-free installation.

• Indoor & Outdoor
• Long-term (8 Years)

Do not use for graphics applied to:
Stainless steel.
Watercraft when the graphic is below the static water line.
Watercraft graphics that are not edge sealed.
Painted substrates with poor paint to substrate, or paint-to-paint bond.
Substrate surfaces that are not clean and smooth (little or no variation in texture).

Do not use the film for graphics that require removal from:
Applications with poor paint-to-substrate adhesion.
Existing graphics that must remain intact; damage may occur during removal.
Watercraft.
Outdoor, horizontal applications.
Do not use for graphics subjected to gasoline vapors or spills, including those at or on
gas pumps, automobile fuel-tank ports, watercraft or top-feeding, petroleum tankers.

MAINTENANCE & CLEANING:
Use a cleaner designed for high-quality painted surfaces. The cleaner must be wet, non-abrasive, without strong solvents, and have a pH value between 3 and 11 (neither strongly acidic nor strongly alkaline.)
REMOVAL:
Removal requires heat and/or chemicals. The ease and rate of removal depends on a number of factors. A chemical remover system is available for graphics printed with solvent-based ink.